Comparison of Dissolved Air Flotation and Conventional Sedimentation in Turbidity -- oval Source Water Using Poly Aluminum Chloride as Coagulant

Document Type : Original Article

Authors

Abstract
surface run off from different levels of a land carry many types of impurities and so it should be purified before any consumption. To separate these materials three processes can be used: sedimentation, filtration and flotation. The objective of this study is comparing the flotation and conventional systems in removed turbidity. This is an experimental - intervention in a pilot scale study that compare the turbidity, alkalinity, temperature, pH and TSS in conventional sedimentation system with those of dissolved air flotation. Method in this study, poly aluminum chloride used as a coagulants and kaolin was used to produce turbidity. The results showed that was turbidity removal efficiency of dissolved air flotation system in turbidities NTU20, NTU30-50 and NTU90-110,were respectively 14.7, 11.1 and 10.9 percent higher than those of the conventional deposition system, determined of the level of (p

Keywords


Volume 5, Issue 1 - Serial Number 8
March and April 2011
Pages 33-40

  • Receive Date 31 August 2009
  • Revise Date 24 October 2009
  • Accept Date 11 May 2011